Channel Talker MADI
MADI Signal Generator: 64 Channel
With Voice-over ID
- Professional Digital Audio Test Equipment –
The CT-MADI signal generator makes it possible for one person to setup or verify a MADI communication link easily, quickly, and accurately. The unit produces a hands-free audible sequential voice ID for each channel, eliminating the need for external generators or extra personnel to switch between sources. In addition to the voice ID’s, the CT-MADI includes four tone sets that will verify frequency response and level accuracy. MADI outputs are available on both COAX and FIBER. The unit can be locked to a variety of external references and generates a re-clocked Word clock.
In addition to a MADI output, there is a Reference AES DAR output and AES Audio output with the same signal that is on the MADI channels.
Channel Talker Specifications:
MADI Output: 64 Channels embedded on 125Mb serial digital channel. Outputs on COAX and FIBER. Signal is locked to Word Clock. Fiber: SC connector, 1300nm wavelength. COAX: 600mv into 75 ohms.
WORD Clock Input: Word clock input will lock to input greater than 200mVP-P. Clock input 48KHz +/- 200ppm.
WORD Clock Output: Word clock output 48KHz will drive 2.5VP-P into 75 ohms. Internal jumper to select 4.5VP-P output.
Tones: 4 tones selectable:
ID Mode: Select voicing and Tone combinations 1) Both ON, 2) Voicing Only, 3) Tones Only, 4) MUTE
Channel Output: Digital stream output with 4 selectable tones. Identical information is on both
channels. Output is AES/EBU compatible 1.0VP-P into 75 Ohm BNC).
DAR Output: One Digital Audio Reference output (DAR). Audio
output Left and Right = 0.00 volts (minus infinity db – dead silence). Class 1
reference signal. Output is AES/EBU compatible (1.0VP-P into 75 Ohm BNC).
DAR/Color Black Input: Locks to
external reference 48Khz data stream, or standard house reference Color Black analog video.
Channel ID: Sequential voice channel ID overlay on all 64 channels for ease of identification. Natural voice wav file. Unit is pre-programmed with generic sequencing 2/3 sec phrases (“One”, “Two”, "Three", etc.).
Input Voltage: 5VDC Connector 2.1mm X 5.5mm X 11mm (inside x outside x Length). Dual power input for redundant power operation.
Input Current: 500ma Maximum.
Input Power Supply: Two 110-240VAC to 5VDC @1000ma green converters.
0 C to 50 C (32 F to 125 F) non-condensing.
Warranty: 90 days to cover normal operation, defects in materials, and workmanship.
W X D X H: 207mm x 178mm x 43mm (8.15in x 7.0in x 1.7in). 1U high 1/2 Rack compatible.
Note: Items Include:
CT-MADI-A: CTMADI & two power supplies (USA Plug). Tone level -20DBFS.
CT-MADI-B: CTMADI & two power supplies (EURO Plug). Tone level -18DBFS.
Half Rack Mounting Kit (HRMK-1U) includes: Half Rack Panel (HRP-1U), and Rack Mounting Hardware (RMH-1U).
Half Rack Panel (HRP-1U) includes: Half rack blank panel, and screws to join to panel to equipment.
Rack Mounting Hardware (RMH-1U) includes: Two Rack mounting tabs to join equipment to rack, and 4 screws to mount tabs to equipment. Rack screws not included.
(Dealer inquiries welcome) Shop
On-line With PayPal
Shop On-line With PayPal
*Actual shipping and handling charges are based on method of shipping and destination.
Note: Foreign shipping is easiest if
paid with your shipping account.
Download MADI User Guide: CT-MADI_User_Guide.pdf (212KB).
Download MADI Wave Saver: MADI_WAV_IT.exe (5.191MB).
Download Side-by-side rack mount assembly guide: CT_side_by_side_assembly.pdf (PDF 51KB)
Note: Specifications subject to change without notice. The information in this document is believed to be accurate. Vancura Innovations assumes no responsibility for possible printing errors and omissions.
Send mail to
questions or comments about this web site.